Change language: 
Putzmeister international
PartnerNet

Ergonic for truck mounted concrete pumps


       ... by Putzmeister

Greater efficiency, lower costs, increased flexibility – these are the results that Putzmeister truck.mixer concrete pumps with Ergonic® systems can achieve in practice.

 
EBC - Ergonic Boom Control
at a glance:
  • Precise concrete placement with high output
  • Blocking critical areas reinforces safe working
  • Simple boom control unburdens the operator
  • Smoother end hose thanks to vibration damping
  • Improved ergonomics with One Touch Control
  • Precise vertical control of the end hose with a simple turn of the joystick
  • Increased operational safety due to semi-automatic folding in/out
  • Computer-aided arm control optimises concreting
  • High machine availability thanks to high-quality components and rapid diagnostics

Ergonic® Remote control:
Within your grip!
  • Ergonomic boom control with two joysticks
  • The EBC functions can be directly operated using the radio remote control. When EBC operation is activated, it is possible to control the boom with only one joystick.
  • The pump operator receives up-todate feedback and system displays for the machine directly on the clear display
  • Simple operation of the entire display menu via rotary pushbutton

EPS - Ergonic Pump System
at a glance:
  • Smooth pumping process
  • Less noise emission thanks to the silence function (PUMI®)
  • Low wear
  • Low fuel consumption
  • Vibrations in the machine and boom are reduced
  • Fully electronic control of the concrete pump
  • Fewer hydraulic components
  • Doubly protected control
  • EOC (Ergonic® Output Control) is included in EPS

EGD - Ergonic® Graphic Display
provides a full overview

Simple control and increased operational safety

It provides information about:

  • Hydraulic fluid temperature
  • Operating hours
  • Delivery pressure/delivery pressure limit
  • Delivery rate/delivery rate limit

EOC – Ergonic Output Control
from zero to a hundred in one turn

The delivery rate of the pump is set directly with just one knob on the radio remote control. The electronics of the EOC then regulate the optimal engine speed for the lowest level of fuel consumption, wear and noise. Unfavourable conditions, such as full.

 


ETS – Ergonic® Tele Service
your advantage in the event of a service
  • Higher machine availability and lower costs
  • directly on the machine via a Service laptop
  • remotely via a modem and PC in the concrete pumping service workshop or at the Putzmeister After Sales Service 

 

 

 

Ergonic brochure BP 3763


EMC – Ergonic® Mixer Control*
Operates the mixer drum by radio remote control, including adding water and cleaning. (*for Pumi and Truck mixer)
 

Ergonic 1 radio remote control

Ergonic 1 radio remote control
 

Ergonic® radio remote control (FFS) – everything at a glance, everything under control
In addition to enabling convenient boom control, the radio remote control allows the machine operator to monitor and set various different parameters. The machine operator has access to up-to-date feedback and system information, such as engine speed, fluid temperature, concrete pressure, output, and pressure and volume limit at any time on the display. The strength of the radio signal and charge status of the battery are also indicated via bars.*

Ergonic® FFS at a glance
■■ Information is made available at the workstation of the machine operator on the radio remote control display
■■ Ergonomic boom control with two joysticks
■■ Convenient one-handed control (only with EBC) reducing the effort required by machine operators
■■ Up-to-date feedback and system information for the machine transmitted onto the easily readable display by an additional signal
■■ Easy operation of the entire display menu via rotary push button


 

Ergonic 2 radio remote control

Ergonic 2 radio remote control
 

Ergonic® FFS 2.0 at a glance

■■ Ergonomic boom control with two joysticks
■■ Convenient one-handed control (only with EBC) reduces the effort required by machine operators
■■ EBC functions operated directly using the radio remote control
■■ Can also be used as a cable remote control (e.g.where radio communication is prohibited)
■■ Easy replacement of the radio remote control thanks to radiomatic® iLOG technology
■■ Lithium ion battery for a working time of up to 17 hours
■■ Optimum clarity thanks to modern menu guidance and 3.5” colour display
■■ Leak-tight and robust thanks to encapsulated electronics
■■ Improved safety on the construction site thanks to a lamp with pocket torch function
■■ Includes functional contents for EMC on the PUMI®

Multiple truck-mounted concrete pumps – one remote control
By exchanging the integrated chip card, the radio remote control can be used for all concrete pumps, regardless of the number of arm segments.

 
 

Name:
Passwort:

Homepage Sitemap Impressum Print page
Enter your search here.

Feedback GO    
 
Find us on Facebook